B-4
1-1. Hoisting and Lowering the Machine
Operation flow
This section describes the procedures to hoist and lower the machine using a crane.
Equipment you must have ready
The following jigs, tools and equipment should be readied to hoist and lower the machine by crane.
Crane (rated for a hoisting load of 2,000 kg or heavier)
Allen wrench (10 mm)
Dedicated hoisting jig set (See the table below.)
Safety shoes, protective gloves
[Composing parts of the dedicated hoisting jig set]
Item
DISCO Parts ID
Qty.
HANGER
HANGER
LJUJ-910003-0
（
MOJUJ003--A
）
1
SHACKLE (A)
SHACKLE
LENJ-910035-0
（
MOENJ035
）
4
SHACKLE (B)
SHACKLE
LCAJ-910006-0
（
MOCAJ006--A
）
6
SLING (A)
SLING
LENJ-910074-0
（
MOENJ074
）
2
SLING (B)
SLING
LENJ-910038-0
（
MOENJ038--A
）
4
HOISTING JIG (Front)
HOISTING JIG
LJUJ-910005-0
（
MOJUJ005
）
2
HOISTING JIG (Rear)
HOISTING JIG
LJUJ-910006-0
（
MOJUJ006
）
2
Cautions in hoisting and lowering the machine
DANGER
While the machine is hoisted or lowered, stay away from the area beneath and
around the machine
If the machine should fall, persons in such area may be crushed to death or severely
injured, or if the machine should swing like a pendulum, they may be caught between
the machine and wall or hit by the machine to death or severely injured.
Make sure to secure the machine with the dedicated hoisting jigs when hoisting
the machine
If the machine should fall while the machine is hosted or lowered, persons beneath or
near it may be crushed to death or severely injured. Note that the machine weighs
approximately 1,300 kg.
