A-9
Environmental conditions required for installing the machine (Continued)
Others
・
Make sure that the air, water, and power sources and the water drain ports
are positioned near the machine.
・
Install valves which can be locked out for both the air and water supplies at
the facility-side. These should be prepared by the customer.
・
Ensure that the insides of the employed hoses are free of dirt.
・
Install the machine on the floor of adequate strength (refer to Section 3-1
[Installation Space] of this chapter for the required load-carrying capacity
of the floor).
・
Do not install the machine in places where noise, vibration, heat, or oil mist
is generated or near fans and ventilation openings.
・
If the machine is used or kept in the environment where dirt and dust float
around, precision parts of the machine may be worn out or get dirty
quickly, which could shorten the part life or adversely affect processing
and part quality.
If you need to use or keep the machine in the environment where dirt and
dust float around, please consult DISCO sales representatives.
・
Machine anchors are optionally available. They are designed to provide
human/equipment protection in the event of an earthquake or other disaster.
It is recommended that the installed machine be secured with these
anchors.
・
Do not use this machine at any place other than an industrial or commercial
facility.
This machine is designed for industrial use and its EMC performance has
been evaluated as EN55011, Group 1, Class A.
Therefore, there is a possibility that electromagnetic noise may exceed the
limit defined by standards for residential environments.
