B-9
1-2. Transferring the Machine
Content of this section
This section describes the procedures to transfer the unloaded machine to the installation site using a
forklift.
Equipment you must have ready
The following tools as well as forklift should be readied to transfer the machine.
Forklift
Load transporting capacity: 1,300 kg or heavier
Fork length: 1,500 mm or longer
Safety shoes, protective gloves
Cautions in transferring the machine
DANGER
The employed forklift must be capable of moving up and down and transporting
a load of 1,300 kg and be equipped with a fork of 1,500 mm or longer
If the machine is transferred while its gravity is not properly centered on the forklift, it
may fall causing severe personal injury or death.
The mass of the machine is approximately 1,300 kg.
When transferring the machine by forklift, make sure that the gravity center of
the machine is on the forklift center
If the machine is transferred while its gravity is not properly centered on the forklift, it
may fall causing severe personal injury or death.
The mass of the machine is approximately 1,300 kg.
Make sure that the fork of the forklift is correctly inserted into the designated
position so that the gravity center of the machine is on the center of the forklift
If the fork of the forklift is not correctly positioned under the machine, it may cause
the machine to topple or fall off the forklift during transportation, causing nearby
persons seriously injured or crushed to death.
Gravity center
