B-36
1-8. Removal of Retainers Used for Machine Transportation
Operation flow
1-8-1
Removal of Z-axis Retainer Jig
1-8-2
Removal of Y-axis Retainer Jig
Retainer jigs used for machine transportation
Retainer jigs fix drive sections of the machine to their positions during machine transportation. They are
attached to the following sections of the machine.
・
Z-axis (see Section 1-8-1)
・
Y-axis (see Section 1-8-2)
1-8-1. Removal of Z-axis Retainer Jig
Equipment you must have ready
Allen wrench (5 mm)
Procedures to remove the Z-axis retainer jig from the machine
Step No.
Procedure
(Continued from Section1-7)
1
Open the grinding section side cover (L).
2
Remove the Z-axis retainer jig (red) from the machine. To remove the retainer jig, you
should first remove the 4 hexagon socket-head screws (M6) fixing the jig.
Z-axis retainer jig
3
Put the removed jig in safe keeping.
Continued in the next section.
