manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 99 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 99

 

98

7.6.6 vlan name   

 

This command changes the name of a VLAN. The name is an alphanumeric string of up to 32 
characters, and the ID is a valid VLAN identification number. ID range is 14094.   

Default  

The name for VLAN ID 1 is always Default. The name for other VLANs is defaulted to a 

blank string.   

Format  

vlan name <

2-4094> <name>

   

 

     Mode  

VLAN data base 

 

7.6.6.1 no vlan name 
 

This command sets the name of a VLAN to a blank string. The VLAN ID is a valid VLAN 
identification number. ID range is 1-4094. 
 

Format  

no vlan name <

2-4094> 

 

Mode  

VLAN database 

 

7.6.7 vlan participation   

 

This command configures the degree of participation for a specific interface in a VLAN. The ID is a 
valid VLAN identification number, and the interface is a valid interface number 

. 

 

Format  

vlan participation <

exclude | include | auto> <1-4094> 

Mode 

 Interface Config  

Participation options are:   

include  

The interface is always a member of this VLAN. This is equivalent to registration fixed.   

exclude  

The interface is never a member of this VLAN. This is equivalent to registration for-

bidden. 

 

auto  

The interface is dynamically registered in this VLAN by GVRP. The interface will   

not participate in this VLAN unless a join request is received on this interface. This is   
equivalent to registration normal.   

 

7.6.8 vlan participation all   

 

This command configures the degree of participation for all interfaces in a VLAN. The ID is a valid 
VLAN identification number

. 

 

Format  

vlan participation all <

exclude | include | auto> <1-4094>

 

Mode  

Global Config 

 

Participation options are:   

include  

The interface is always a member of this VLAN. This is equivalent to registration fixed. 

 

exclude  

The interface is never a member of this VLAN. This is equivalent to registration for-

bidden.

 

 

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов