manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 226 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 226

 

225

Mode    

 

Policy-Class-Map Config

 

Incompatibilities   

Drop 

9.5.4 conform-color   

 

This command is used to enable color-aware traffic policing and define the conform-color and 
exceed-color class maps used. Used in conjunction with the police command where the fields for 
the conform level (for simple, single-rate, and two-rate policing) and optionally the exceed level (for 
single-rate and two-rate policing) are specified. The <

class-map-name

> parameter is the name of 

an existing Diffserv class map, where different ones must be used for the conform and exceed 
colors.  

Note: 

This command may only be used after specifying a police command for the 
policy-class instance.   

Format   

conform-color <class-map-name> [exceed-color <class-map-name>]   

Mode   

Policy-Class-Map Confi

g 

 

9.5.5 class   

 

This command creates an instance of a class definition within the specified policy for the purpose 
of defining treatment of the traffic class through subsequent policy attribute statements. The 
<

classname> 

is the name of an existing DiffServ class.   

Note: 

This command causes the specified policy to create a reference to the class definition.   

Note: 

The CLI mode is changed to Policy-classmap Config when this command is 
successfully executed.   

Format   

class <classname>

   

Mode    

Policy-Map Config 

9.5.5.1 no class 

 

This command deletes the instance of a particular class and its defined treatment from the 
specified policy. <

classname> 

is the names of an existing DiffServ class.   

Note: 

This command removes the reference to the class definition for the specified policy.   

Format  

no class <classname>

 

Mode  

Policy-Map Config 

9.5.6 mark cos 

 

This command marks all packets for the associated traffic stream with the specified class of 

servicevalue in the priority field of the 802.1p header (the only tag in a single tagged packet or the 

first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain 

this header, one is inserted. The CoS value is an integer from 0 to 7. 

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов