manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 219 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 219

 

218

9.4.5 match class-map   

 

This command adds to the specified class definition the set of match conditions defined for 
another class. The <

refclassname> 

is the name of an existing DiffServ class whose match 

conditions are being referenced by the specified class definition.   

Note: there is no [

not

] 

option for this match command. 

Default   

none 

Format   

match class-map 

<refclassname>

 

Mode    

Class-Map Config   

Restrictions  

The class types of both <

classname>

and <

refclassname>

 must be identical (i.e.,   

any vs. any, or all vs. all). A class type of acl is not supported by this command. Cannot specify

 

<refclassname>

 the same as <

classname>

 (i.e., self-referencing of class name not allowed).   

At most one other class may be referenced by a class.   
Any attempt to delete the <

refclassname>

 class while still referenced by any <

classname

> shall 

fail. The combined match criteria of <

classname>

 and <

refclassname> 

must be an allowed 

combination based on the class type. Any subsequent changes to the <

ref-classname> 

class 

match criteria must maintain this validity, or the change attempt shall fail.   
The total number of class rules formed by the complete reference class chain (includes both 
predecessor and successor classes) must not exceed a platform-specific maximum.   

In some cases, each removal of a refclass rule reduces the maximum number of available rules in 
the class definition by one.   

 

9.4.5.1 no match class-map 

 

This command removes from the specified class definition the set of match conditions defined for 
another class. The <

refclassname> 

is the name of an existing DiffServ class whose match 

conditions are being referenced by the specified class definition. Note: there is no [

not] 

option for 

this match command.   

Format   

no match class-map 

<refclassname> 

 

Mode    

Class-Map Config

 

 

9.4.6 match cos   

 

This command adds to the specified class definition a match condition for the Class of Service 
value (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN 
tagged packet). The value may be from 0 to 7. The optional [

not] 

parameter has the effect of 

negating this match condition for the class (i.e., match all class of service values except for what is 
specified here).   

Default   

none  

Format   

match [not] cos 

<0-7> 

 

Mode    

Class-Map Config   

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов