manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 159 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 159

 

158

7.21 Link Aggregation (LAG)/Port-Channel (802.3AD) 
Commands  

 

This section provides a detailed explanation of the LAG commands. The LAG feature initially load 
balances traffic based upon the source and destination MAC address. If an ARP entry is learned on 
the LAG then the LAG is converted to load balance based upon source/destination IP address.   

The commands are divided into two functional groups:   

„

  Show commands display switch settings, statistics, and other information.   

„

  Configuration commands configure features and options of the switch. For every 

configuration command, there is a show command that displays the configuration setting.   

Note:

Use the 

clear port-channel 

command to clear port channels.   

Note:

After a LAG is created, the user should assign the LAG VLAN membership. If VLAN 

membership is not assigned, the LAG may become a member of the management VLAN. 
This may result in learning and switching issues. 

 

 

7.21.1 port-channel staticcapability   

This command enables the support of port-channels (static link aggregations - LAGs) on the device. 
By default, the static capability for all port-channels is disabled.   

Default  

disabled  

Format  

port-channel staticcapability   

Mode  

Global Config   

 

7.21.1.1 no port-channel staticcapability 

 

This command disables the support of static port-channels (link aggregations - LAGs) on the 
device.  

Format  

no port-channel staticcapability 

Mode  

Global Config 

 

7.21.2 port lacpmode all   

 

This command enables Link Aggregation Control Protocol (LACP) on all ports.   

Format  

port lacpmode all 

Mode  

Global Config 

 

7.21.2.1 no port lacpmode all 

 

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов