Digitus DN-80233 Скачать руководство пользователя страница 300

Страница: 300 / 379

299

display successful results routing must be enabled per interface (i.e. ip rip).

Format

show ip rip interface brief

Mode

Privileged EXEC and User EXEC

Unit/Slot/Port

Valid unit, slot and port number separated by forward slashes.

IP Address

The IP source address used by the specified RIP interface.

Send Version

The RIP version(s) used when sending updates on the specified interface. The

types are none, RIP-1, RIP-1c, RIP-2.

Receive Version

The RIP version(s) allowed when receiving updates from the specified

interface. The types are none, RIP-1, RIP-2, Both

RIP Mode

RIP administrative mode of router RIP operation; enable activates,

disable de-activates it.

Link State

The mode of the interface (up or down).

11.7.16 show ip rip interface

This command displays information related to a particular RIP interface.

Format show ip rip interface <unit/slot/port>

Mode Privileged EXEC and User EXEC

Interface

Valid unit, slot and port number separated by forward slashes. This is a configured

value.

IP Address

The IP source address used by the specified RIP interface. This is a configured

value.

Send version

The RIP version(s) used when sending updates on the specified interface. The

types are none, RIP-1, RIP-1c, RIP-2. This is a configured value.

Receive version

The RIP version(s) allowed when receiving updates from the specified

interface. The types are none, RIP-1, RIP-2, Both. This is a configured value.

Both RIP Admin Mode

RIP administrative mode of router RIP operation; enable activates, disable

de-activates it. This is a configured value.

Link State

Indicates whether the RIP interface is up or down. This is a configured value.

Authentication Type

The RIP Authentication Type for the specified interface. The types are

none, simple, and encrypt. This is a configured value.

Default Metric

A number which represents the metric used for default routes in RIP updates

originated on the specified interface. This is a configured value.
The following information will be invalid if the link state is down.

Bad Packets Received

The number of RIP response packets received by the RIP process

which were subsequently discarded for any reason.

Bad Routes Received

The number of routes contained in valid RIP packets that were ignored

for any reason.

Updates Sent

The number of triggered RIP updates actually sent on this interface.

Содержание DN-80233




























































































































































































































































































































































































Результаты поиска

Содержание DN-80233

Отзывы:

Digitus DN-80233, Руководство пользователя, Страница: 300 / 379

Результаты поиска

Содержание DN-80233

Отзывы: