manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 257 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 257

 

256

This command disables the forwarding of network-directed broadcasts. When disabled, 
network directed broadcasts are dropped.   

Format   

no ip netdirbcast

 

Mode    

Interface Config 

11.2.9 ip mtu 

 

This command sets the IP Maximum Transmission Unit (MTU) on a routing interface. The IP MTU 
is the size of the largest IP packet that can be transmitted on the interface without fragmentation. 
The switch currently does not fragment IP packets. 

„

  Packets forwarded in hardware ignore the IP MTU.  Packets forwarded in software are 

dropped if they exceed the IP MTU of the outgoing interface.   

„

  Packets originated on the router, such as OSPF packets, may be fragmented by the IP 

stack. The IP stack uses its default IP MTU and ignores the value set using the ip mtu 
command. 

OSPF advertises the IP MTU in the Database Description packets it sends to its neighbors 
duringdatabase exchange. If two OSPF neighbors advertise different IP MTUs, they will not form 
anadjacency (unless OSPF has been instructed to ignore differences in IP MTU with the ip ospf 
mtuignore command.) 

Note: 

The IP MTU size refers to the maximum size of the IP packet (IP IP payload). It 

does not include any extra bytes that may be required for Layer-2 headers. To receive and process 
packets, the Ethernet MTU (See “mtu” on page 32.) must take into account the size of the Ethernet 
header.  

„

  The minimum IP MTU is 68 bytes.  

„

  The maximum IP MTU is 1500 bytes. 

Default   

1500 bytes 

 

Format

   

 

ip mtu <mtu>

 

 

Mode 

   

Interface Config

 

 

11.2.9.1 no ip mtu

 

This command resets the ip mtu to the default value.   

Format  

no ip mtu <mtu>

 

 

Mode  

Interface Config

   

11.2.10 show ip brief   

 

This command displays all the summary information of the IP. This command takes no options.   

Format  

show ip brief

 

 

Modes   

Privileged EXEC   User EXEC 

Default Time to Live   

The computed TTL (Time to Live) of forwarding a packet 

from the local router to the final destination.   

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов