Digitus DN-80233, Руководство пользователя

Страница: 43 / 379

42
5.0 Quick Start up
The CLI Quick Start up details procedures to quickly become acquainted with the
the switch’s managed commands.
5.1 Quick Starting the Networking Device
1. Read the Chapter 2.0 for the connectivity procedure. In-band connectivity allows
access to the Web and CLI command interface locally or from a remote
workstation. The device must be configured with IP information (IP address,
subnet mask, and default gateway).
2. Turn the Power ON.
3. Allow the device to load the software until the login prompt appears. The device
initial state is called the default mode
4.
When the prompt asks for operator login, execute the following steps:
Type the word
admin
in the login area. Since a number of the Quick Setup commands
require administrator account rights, we suggests logging into an administrator account.
Do not enter a password because there is no password in the default mode.
Press the enter key two times.
The CLI User EXEC prompt will be displayed.
Use “enable” to networking device to the Privileged EXEC mode from User EXEC.
Use “configure” to switch to the Global Config mode from Privileged EXEC.
Use “exit” to return to the previous mode.
5.2 System Info and System Setup
Quick Start up Software Version Information
Table 2
Quick Start up Software Version Information
Command Details
show hardware
(in Privileged EXEC)
Allows the user to see the software version the device contains
Machine Model (The type and number of ports the device
provides.)
For example:
Machine Model………….
24+2G
24 = 24 10/100 ports
02 = 2 Uplink ports on back of switch