manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 297 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 297

 

296

Default   

The default key id is not defined. Unauthenticated interfaces do not need an 

authentication key id

. 

 

Format      ip rip authentication {none | {simple <key>} | {encrypt <key><keyid>}} 

 

Mode          Interface Config 

 

11.7.8.1 no ip rip authentication

 

This command sets the default RIP Version 2 Authentication Type.   

Format    no ip rip authentication 

Mode   Interface Config 

 

11.7.9 ip rip receive version 

 

This command configures the interface to allow RIP control packets of the specified version(s) to 
be received.   

The value for <mode> is one of: rip1 to receive only RIP version 1 formatted packets, rip2 for RIP 
version 2, both to receive packets from either format, or none to not allow any RIP control packets 
to be received.   

Default  

both  

Format    ip rip receive version {rip1 | rip2 | both | none}   

Mode   Interface Config

 

 

11.7.9.1 no ip rip receive version

 

This command configures the interface to allow RIP control packets of the default version(s) to 
be received.   

Format    no ip rip receive version 

Mode   Interface Config

 

11.7.10 ip rip send version   

 

This command configures the interface to allow RIP control packets of the specified version to be 
sent.  

The value for <mode> is one of: rip1 to broadcast RIP version 1 formatted packets, rip1c (RIP 
version 1 compatibility mode) which sends RIP version 2 formatted packets via broadcast, rip2 for 
sending RIP version 2 using multicast, or none to not allow any RIP control packets to be sent.   

Default  

rip2  

Format    ip rip send version {rip1 | rip1c | rip2 | none}   

Mode   Interface Config 

 

11.7.10.1 no ip rip send version 

 

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов