Digitus DN-80233, Руководство пользователя

Страница: 192 / 379

191
quiet-period:
Sets the value, in seconds, of the timer used by the authenticator state machine on
this port to define periods of time in which it will not attempt to acquire a supplicant. The
quiet-period must be a value in the range 0 - 65535.
tx-period:
Sets the value, in seconds, of the timer used by the authenticator state machine on this
port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The
quiet-period must be a value in the range 1 - 65535.
supp-timeout:
Sets the value, in seconds, of the timer used by the authenticator state machine on
this port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.
server-timeout:
Sets the value, in seconds, of the timer used by the authenticator state machine
on this port to timeout the authentication server. The supp-timeout must be a value in the range 1 -
65535.
Default reauth-period: 3600 seconds
rquiet-period: 60 seconds
tx-period: 30 seconds
supp-timeout: 30 seconds
server-timeout: 30 seconds
Format t1x timeout {{reauth-period <seconds>} | {quiet-period <sec-onds>} | {tx-period <seconds>} |
{supp-timeout <seconds>} | {server-timeout <seconds>}}
Mode
Interface Config
8.2.13.1 no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on this port
to the default values. Depending on the token used, the corresponding default values are set.
Format
dot1x timeout {reauth-period | quiet-period | tx-period | supp-timeout |
server-timeout}
Mode
Interface Config
8.2.14 dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
Format
dot1x user
<user> {<
unit/slot/port
> | all}
Mode
Global Config
8.2.14.1 no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format no dot1x user
<user> {
<
unit/slot/port
>
| all}
Mode
Global Config
8.2.15 dot1x port-method macbased
This command sets the authentication mode based on MAC address.
Format
dot1x port-method macbased