Digitus DN-80233 Скачать руководство пользователя страница 247

Страница: 247 / 379

246

Configured Card Description

This field displays the card description. This field is displayed only

if the slot is pre-configured.

Pluggable

This field indicates whether cards are pluggable or non-pluggable in the slot.

Power Down

This field indicates whether the slot can be powered down.

10.1.12 show supported cardtype

This commands displays information about all card types supported in the system.

Format show supported cardtype

Mode User Exec Card Index (CID)

This field displays the index into the database of the

supported card types. This index is used when pre-configuring a slot.

Card Model Identifier

This field displays the model identifier for the supported card type.

10.1.12.1 show supported cardtype [cardindex]

This commands displays information about specific card types supported in the system.

Format show supported cardtype <cardindex>

Mode User ExecCard Type

This field displays the 32-bit numeric card type for the supported card.

Model Identifier

This field displays the model identifier for the supported card type.

Card Description

This field displays the description for the supported card type.

10.1.13 reload

This command resets the entire stack or the identified

[unit].

The administrator is prompted to

confirm that the reset should proceed.

Format reload [unit]

Mode Global Config

Содержание DN-80233




























































































































































































































































































































































































Результаты поиска

Содержание DN-80233

Отзывы:

Digitus DN-80233, Руководство пользователя, Страница: 247 / 379

Результаты поиска

Содержание DN-80233

Отзывы: