manualshive.com logo in svg

Digitus DN-80233, Руководство пользователя, Страница: 106 / 379

Поделиться
Скачать
Digitus DN-80233 Скачать руководство пользователя страница 106

 

105

7.6.23 show vlan port   

 

This command displays VLAN port information.   

Format  

show vlan port {<unit/slot/port> | all} 

 

Modes   

Privileged EXEC 

User EXEC

 

Unit/Slot/Port  

Valid unit, slot and port number separated by forward slashes. It is possible to 

set the parameters for all ports by using the selectors on the top line.   

Port VLAN ID   

The VLAN ID that this port will assign to untagged frames or priority tagged 

frames received on this port. The value must be for an existing VLAN. The factory default is 1. 

 

Acceptable Frame Types   

Specifies the types of frames that may be received on this port. The 

options are 'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or priority 
tagged frames received on this port are discarded. When set to 'Admit All', untagged frames or 
priority tagged frames received on this port are accepted and assigned the value of the Port VLAN 
ID for this port. With either option, VLAN tagged frames are forwarded in accordance to the 802.1Q 
VLAN specification. 

 

Ingress Filtering   

May be enabled or disabled. When enabled, the frame is discarded if this port 

is not a member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is 
identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified 
for the port that received this frame. When disabled, all frames are forwarded in accordance with 
the 802.1Q VLAN bridge specification. The factory default is disabled.   

GVRP  

May 

be enabled or disabled.   

Default Priority   

The 802.1p priority assigned to tagged packets arriving on the port.     

 

7.6.24 vtrunk set 

This command configures    port as trunk port, the port is included into the all VLAN’s that are 
mentioned in <vlan-list>, and traffic will be transmitted as tagged. The syntax of the <vlan-list> is 
separate non-consecutive VLAN IDs with a comma and no spaces; use a hyphen to designate a 
range of IDs.         

Format  

vtrunk set {<vlan-list>} 

 

Modes   

Interface config 

<vlan-list>   

The syntax of the <vlan-list> is separate non-consecutive VLAN IDs with a comma 

and no spaces; use a hyphen to designate a range of IDs. For example, you may set “vtrunk set 
1,2,5-8”. 

 

7.6.25 vtrunk clear 

This command remove the vlan id specified in <vlan-list> from this interface.   

Format  

vtrunk clear {<vlan-list>} 

 

Modes   

Interface config 

<vlan-list>   

The syntax of the <vlan-list> is separate non-consecutive VLAN IDs with a comma 

Содержание DN-80233




























































































































































































































































































































































































Отзывы:

Нет отзывов