Digitus DN-80233 Скачать руководство пользователя страница 181

Страница: 181 / 379

180

8.0 Security Commands

This section provides a detailed explanation of the Security commands. The commands are divided
into the following groups:

Configuration commands are used to configure features and options of the switch. For every

configuration command there is a show command that will display the configuration setting.

Show commands are used to display switch settings, statistics and other information.

8.1 Port Security Commands

This section provides a detailed explanation of the Port Security commands. The commands are
divided into the following groups:

Configuration commands are used to configure features and options of the switch. For every

configuration command there is a show command that will display the configuration setting.

Show commands are used to display switch settings, statistics and other information.

8.1.1 port-security

This command enables port locking at the system level (Global Config) or port level (Interface

Config)

Default

Disabled

Format

port-security

Modes

Global Config
Interface Config

8.1.1.1 no port-security

This command disables port locking at the system level (Global Config) or port level (Interface
Config).

Format

no port-security

Modes

Global Config
Interface Config

8.1.2 port-security deny

This command enables port locking at interface level in deny mode.

Default

Disabled.

Format

port-security deny

Modes

Interface Config

8.1.2.1 no port-security deny

Содержание DN-80233




























































































































































































































































































































































































Результаты поиска

Содержание DN-80233

Отзывы:

Digitus DN-80233, Руководство пользователя, Страница: 181 / 379

Результаты поиска

Содержание DN-80233

Отзывы: