x
Organization
This manual is organized as follows:
Section
Description
Chapter 1
Provides an overview of the DECserver 900MC module and
describes its features.
Chapter 2
Provides instructions for installing the DECserver 900MC
module in a DEChub 900 MultiSwitch.
Chapter 3
Provides instructions for installing the setup port on the
DECserver 900MC.
Chapter 4
Provides configuration information when the module is
installed in a DEChub 900 MultiSwitch.
Chapter 5
Provides information on how to install Flash RAM.
Chapter 6
Provides information on how to configure the module’s
built-in modems using the Access Server Manager.
Chapter 7
Provides information on how to configure the module’s
built-in modems using console commands.
Chapter 8
Provides information on how to remove the module from the
DEChub 900 MultiSwitch.
Appendix A
Provides installation-specific problem solving information
using the LEDs and seven-segment display. In addition, it
contains general modem use problem solving information.
Appendix B
Provides connector and pin assignment information.
Appendix C
Provides product specifications for the DECserver 900MC.
Appendix D
Provides information on the Microcom Networking Protocol
(MNP).
Appendix E
Provides information on regulatory requirements.
Appendix F
Provides information on the AT command set, including
command syntax and a description of each command.
Glossary
Lists pertinent terms and their definitions.
