Installing the Module 2-9
How to Install the Module
Task 2: Seat the Module
To seat the module into the DEChub 900 MultiSwitch, complete the following steps:
Figure 2-4: Seating the Module
Step
Action
1
Place the module’s mounting tab (1) into a mounting slot on the
DEChub 900 MultiSwitch.
2
Pull up on the release lever (2) to its unlocked position.
3
Pivot the module on the mounting tab and align the connectors.
4
Firmly push the module onto the backplane connectors.
5
Press down on the release lever (3) to ensure that it is locked.
