DigiDesign Digidesign Pro Tools 8.0, Справочное руководство

Страница: 939 / 1112

Chapter 42: Automation 921
‹
When you take a track or automation type out
of Latch Prime during an automation pass, the
corresponding controls AutoMatch to their cur-
rently written values.
‹
If you AutoMatch a control that is in a Latch
Prime state, the control will no longer be
primed.
To take a track out of Latch Prime:
„
Control-click (Windows) or Command-click
(Mac) the Automation Mode selector on the
track.
The selector button unbolds to indicate that the
track is no longer primed.
To take all tracks out of Latch Prime, do one of the
following:
„
Alt-Control-click (Windows) or Option-Com-
mand-click (Mac) the Automation Mode selec-
tor on a track.
– or –
„
Click the
AutoMatch
button in the Automation
window.
To take all selected tracks out of Latch Prime, do
one of the following:
„
Alt-Control-Shift-click (Windows) or Option-
Command-Shift-click (Mac) the Automation
Mode selector on a track.
– or –
„
Alt-Shift-click (Windows) Option-Shift-click
(Mac) the AutoMatch button in the Automation
window.
To take an automation type out of Latch Prime on
all tracks, do one of the following:
„
In the Automation window, Control-click
(Windows) or Command-click (Mac) the button
for the automation type (Volume, Pan, Mute,
Plug-in, Send level, Send pan, or Send mute).
AutoMatch button in the Automation window
AutoMatch button
Automation types in the Automation window
Automation
type buttons