DigiDesign Digidesign Pro Tools 8.0, Справочное руководство

Страница: 809 / 1112

Chapter 38: Elastic Audio 791
To transpose the pitch of an audio region in the
Transpose window:
1
Make sure the region, or regions, you want to
Transpose are on Elastic Audio-enabled tracks
(using the Polyphonic, Rhythmic, or X-Form al-
gorithm).
2
With the Grabber or Selector tool, select the
audio region you want to transpose. Only re-
gions that are completely selected will be af-
fected.
3
Choose
Event > Event Operations > Transpose
.
4
Do one of the following:
• Adjust the Transpose By settings by an
amount in semitones and cents.
– or –
• Adjust the
Transpose From
and
To
settings
by an amount in Semitones and Cents.
5
Click Apply .
Varispeed and Pitch Shifting
When using the Varispeed algorithm, pitch
transposition and time compression/expansion
are always linked. If you apply pitch transposi-
tion to an audio region using the Polyphonic or
Rhythmic algorithms, that transposition data is
stored in the metadata for the region. Conse-
quently, if you then switch to Varispeed, change
the TCE factor, and then switch back to the orig-
inal Elastic Audio algorithm, the region will re-
vert to the original amount of pitch shifting
while maintaining the amount of time compres-
sion/expansion applied by the Varispeed algo-
rithm.
Removing Region Pitch Shifting
If you have applied any pitch shifting to a re-
gion, you can remove pitch shifting and revert
the region to its original pitch. This can be use-
ful if you are not satisfied with the results and
want to revert to the pre–pitch shifted region.
Elastic Properties window
Event Operations, Transpose
The Transpose All Notes To and the Trans-
pose In Key settings can only be applied to
MIDI notes. When only audio regions are
selected, these options are unavailable.