DigiDesign Digidesign Pro Tools 8.0, Справочное руководство

Страница: 1012 / 1112

Pro Tools Reference Guide 994
Figure 22 shows a channel Output window,
sending and metering to the LFE channel.
Using the LFE fader, you can add any amount of
any multichannel path to the overall LFE out-
put. In the above example, the track’s Center
percentage has been turned off, and the LFE
fader has been raised to route it to the LFE chan-
nel.
Figure 23 shows how a “traditional” LFE track
can be routed to only the LFE channel. This ex-
ample uses a custom-defined LFE sub-path to
the FX main bus path.
LFE and Filtering
Pro Tools applies no filtering to LFE signals.
Some delivery requirements may require filter-
ing for the LFE track. For more information, see
the
Pro Tools Sync & Surround Concepts Guide .
Figure 22. LFE contribution from a stereo output
LFE fader
Figure 23. Discrete LFE routing
LFE faders can follow Mix and Edit Groups.
For information, see “Selecting Group At-
tributes” on page 207.
For instructions on how to create a sub-
path, see “Custom Multichannel Paths” on
page 978.
Main output
to mono
LFE channel