DigiDesign Digidesign Pro Tools 8.0, Справочное руководство

Страница: 385 / 1112

Chapter 18: Record Setup 367
Low Latency Monitoring
(003, 003 Rack, 003 Rack+, Digi 002,
Digi 002 Rack, and Mbox 2 Pro Only)
003, 003 Rack, 003 Rack+, Digi 002, Digi 002
Rack, and Mbox 2 Pro systems can use the
Low
Latency Monitoring
option to record with an ex-
tremely small amount of monitoring latency, to
as many tracks as each system supports. Only
tracks with inputs set to an audio interface (not
a bus) use Low Latency Monitoring.
To use Low Latency Monitoring:
1
Record enable audio tracks by clicking their
Record Enable buttons.
2
From the Output Path selector, assign each
track to either Output 1 or Output 2 (mono), or
both (stereo). Only tracks assigned to these out-
puts use Low Latency Monitoring.
3
Select
Options > Low Latency Monitoring
.
When
Low Latency Monitoring
is enabled, any
plug-ins and sends assigned to record-enabled
tracks (routed to Outputs 1–2) are automatically
bypassed, and must remain bypassed. Also,
these tracks do not register on meters for Master
Faders.
Low Latency Monitoring and
Bounce To Disk
With
Low Latency Monitoring
enabled, only audio
tracks are included with the
Bounce to Disk
com-
mand—Auxiliary Input and Instrument tracks
are ignored. To include Auxiliary Input and In-
strument tracks, disable
Low Latency Monitoring
before using
Bounce to Disk
.
In Pro Tools LE with the Complete Produc-
tion Toolkit option, Low Latency Monitor-
ing is not available in surround sessions.
External input cannot be recorded during a
Bounce to Disk. To include external input
in your bounce, it must be recorded to new
audio tracks before using Bounce to Disk
(see “Bounce to Disk” on page 962).