DH Instruments ADCS-601-AF, Руководство по эксплуатации и обслуживанию

Страница: 81 / 174

4. OPERATION
Page 69 © 2005 - 2007 DH Instruments, a Fluke Company
4.3.2 MAIN MENU
The ADCS Main Menu is a bar across the top of the ADCS Tools program window. Each
main menu selection leads to a drop down menu.
Table 13 summarizes the Main Menu and its sub-menus.
Table 13 . ADCS Tools Main Menu and sub-menus summary
MAIN MENU
ITEM
SUB-MENU
ITEM
DESCRIPTION SEE
SECTION
Start ADCS
or
Stop ADCS
[Start ADCS] starts operation of the ADCS-601-AF system,
establishing communication with system components and
initializing the system. System power must be ON, pressure
sources must be applied and
FPG Tools software must be
running before [Start ADCS] is selected.
[Stop ADCS] stops operation of ADCS-601-AF interrupting
communication between ADCS Tools and system components.
3.4.5
Run Test
Definition Start execution of a predefined Test Definition sequence. 4.4.2.1
Run Manual Test Start execution of a test with data logging but with no predefined
sequence. 4.4.2.2
Run
Exit Program Shut down the ADCS Tools and exit the program. Do not use
this option without reading shut down procedure in Section 3.8.
3.8
Test Set up predefined test sequences for selection and execution
using
[Run] , [Run Test Definition] .
4.4.1.2
DUT Set up of DUTs to be tested. 4.4.1.1
Support Device Set up of instruments/devices to be used in running tests that
are not DUTs, for example a multimeter to read DUT output. 4.4.1.3
Configuration Set up ADCS-601-AF system instruments and adjust test
parameters. 4.1.1
Users Set up ADCS-601-AF system users and manage their
passwords and rights. 4.2.8
Setup
Change Current
User Change the current ADCS-601-AF user. 4.2.8.2
Test Options Set up options relating to managing data collected when running
a test and how tests end. 4.4.1.4
Remote
Communications Send and receive remote commands manually using the Direct
Remote Communication tool. N/A
Tools
Unit of measure
Converter Run the Unit of Measure Converter. This tool not only acts as a
convenient unit converter, it also provides the ability to create
custom pressure units. N/A
View Data File View data files created by running tests or FPG validations. 4.4.3.3
Plot Data File Plot the information in a data file. 4.4.3.3
Database Data
Viewer Sort, plot and display stored test data. 4.4.3.3
Write Data File
to Database Add an existing test Data File to the Test Data Database. This
is a shortcut to the feature available in the Database Data
Viewer. 4.4.3.3
Data
Report Editor Run the Report Editor to generate a report from a test Data File
or data stored in the Test Data Database. 4.4.5
FPG Cal Options FPG8601 zeroing and spanning run time options. 7.2.2
PG Sensors Display and adjust PG7601 ambient conditions sensors. 7.2.7
Calibration View and edit calibration values for active PG7601 piston-
cylinder and mass set.
View and edit value of local gravity used by PG7601 and
FPG8601.
View and edit species of test gas used in ADCS-601-AF system.
7.3.2,
7.3.3, 3.5,
3.6
Maintenance
Run FPG
Validation Run automated routine to validate FPG8601 with PG7601. 7.2.3