Desert Aire SelectAire Plus SP Series, Инструкция по установке и эксплуатации

Страница: 51 / 110

51
Desert Aire - SP Manual
• Lifting lug angle brackets located at each base corner or unit splits have a series of smaller holes
to accommodate bolts for pulling and securing sections together and a larger hole to assist in lifting
and/or maneuvering the unit sections (refer to Figure 29).
Figure 29 – Cabinet Identifier, Vertical and Base Rail Fastening
• The cabinet vertical side spacer sections, these should be secured after the base lifting lug angle
brackets have been secured. Apply the provided double sided tape to the seam of both mating
cabinet sections (see Figure 29). Align the provided mounting strips with each section edge and
apply pressure to secure the strips to the cabinet sections. Use provided drive #8 screws through
all holes in each flange. Repeat the above steps to install the top flange sections (see Figure 30).
Figure 30 – Top Cabinet Fastening
• When pulling sections together that contain refrigeration splits (if applicable), verify all the
refrigeration couplings are aligned to the mating refrigeration tube in the adjacent section.
• Constantly finesse each connection to assure tubing connections are not binding up while slowly
moving the sections together until the sections have been secured.