Desert Aire SelectAire Plus SP Series, Инструкция по установке и эксплуатации, Страница: 107 / 110

107
Desert Aire - SP Manual
Compressor Replacement Form
Location and Unit Information
Installation Name:
Dehumidifier Model #: Serial #:
Form Completed By (Print): Signed:
Company Name: Date:
Company Address: Phone #:
Fax #:
Defective Comp. Model #: Serial#:
(If Tandem Set – Only list the specific failed compressor)
New Compressor Model #: Serial#:
Compressor Condition at Time of Initial Review
Continuity (0 resistance) to Ground on one or more legs Compressor drawing higher current than design
Continuity (0 resistance) between two or more legs
(3 phase units)
Compressor drawing locked rotor current
Other (describe):
Runs without pumping: Pressures: _____ / _____
Continuity (0 resistance) to Ground on one or more legs Compressor drawing higher current than design
Continuity (0 resistance) between two or more legs
(3 phase units)
Compressor drawing locked rotor current
Other (describe):
Runs without pumping: Pressures: _____ / _____
Final Determination of Failure
Liquid Floodback Low Superheat Debris Defective Expansion Valve
Low Sump Oil Insufficient Motor Cooling Other (Describe):
Diagnostic/Corrective Action Summary
Describe what corrective action was taken to prevent a repeat failure.
_________________________________________________________________________________________________
_________________________________________________________________________________________________
_________________________________________________________________________________________________
________________________________________________________________________________________________