Dentsply Sirona Orthophos SL 2D, Руководство по эксплуатации

Страница: 81 / 168

64 94 954 D3632
D3632
.
201.03.08
.
23 07.2018
81
Dentsply Sirona 5 Operation
Operating Instructions Orthophos SL 2D / 3D 5.1 Acquiring the X-ray image
5.1.2.3.5.2 Positioning for maxillary sinus exposures using the bite block
✔
The blue bite block, the forehead support and temple supports are
inserted in the unit.
✔
The relevant hygienic protective sleeves are pulled over the
accessories.
1. Guide the patient in front of the control mirror.
2. Set the unit height using the up (A) and down (B) keys.
CAUTION! The height adjustment motor starts slowly and then
increases its speed.
Press and hold down the button until the desired height is reached.
The unit movement is accompanied by a beep.
Release the height-adjustment buttons once the bite block is at the
same height as that of the patient's anterior teeth.
3. Instruct the patient to hold the handles with both hands and bite into
the bite block.
ª
The patient's anterior teeth are positioned in the indentation in the
bite block. If necessary, push the lower anterior teeth forwards
until they reach a stop.
4. Check the patient's occlusal plane (C). Adjust the unit height using
the up (A) and down (B) keys.
ª
The occlusal plane is slightly inclined toward the front.
B
A
A
C B