Dentsply Sirona Orthophos SL 2D Скачать руководство пользователя страница 68

Страница: 68 / 168

64 94 954 D3632

D3632

201.03.08

23 07.2018

5 Operation

Dentsply Sirona

5.1 Acquiring the X-ray image

Operating Instructions Orthophos SL 2D / 3D

5.1.2.1.8.3

Positioning with chin rest and bar

✔

The patient has no or only a few anterior teeth.

✔

The chin support and bar, and the forehead support and temple

supports are inserted in the unit.

✔

The relevant hygienic protective sleeves are pulled over the

accessories.

1. Instruct the patient to place his chin on the chin rest and place both

hands on the hand grips.

2. Instruct the patient to place his subnasale (the base of his nose)

against the bar. If the patient's lower jaw contains anterior teeth, place

the bar between his chin and his lower lip.

3. Place a cotton roll between the patient's upper and lower jaw.

The patient's upper and lower jaw are aligned.

4. Proceed as described under "Positioning with chin rest and rod for

bite block" from step 6.

5.1.2.1.8.4

Positioning with bite block

✔

The yellow bite block, forehead support and temple supports are

inserted in the unit.

✔

The relevant hygienic protective sleeves are pulled over the

accessories.

1. Instruct the patient to hold the handles with both hands and bite into

the bite block.

The patient's anterior teeth are positioned in the indentation in the
bite block. If necessary, push the lower anterior teeth forwards

until they reach a stop.

2. Proceed as described under "Positioning with chin rest and rod for

bite block" from step 6.

5.1.2.1.8.5

Positioning with contact segment

✔

The patient has no or only a few anterior teeth.

✔

The yellow contact segment, forehead support and temple supports

are inserted in the unit.

✔

The relevant hygienic protective sleeves are pulled over the

accessories.

1. Instruct the patient to hold the handles with both hands and place his

subnasale (the base of his nose) against the contact segment.

2. Place a cotton roll between the patient's upper and lower jaw.

The patient's upper and lower jaw are aligned.

3. Proceed as described under "Positioning with chin rest and rod for

bite block" from step 6.

Содержание Orthophos SL 2D









































































































































































Результаты поиска

Содержание Orthophos SL 2D

Отзывы:

Бренды по названию

Популярные бренды

Dentsply Sirona Orthophos SL 2D, Руководство по эксплуатации

Результаты поиска

Содержание Orthophos SL 2D

Отзывы:

Бренды по названию

Популярные бренды