Dentsply Sirona Orthophos SL 2D, Руководство по эксплуатации

Страница: 63 / 168

64 94 954 D3632
D3632
.
201.03.08
.
23 07.2018
63
Dentsply Sirona 5 Operation
Operating Instructions Orthophos SL 2D / 3D 5.1 Acquiring the X-ray image
5. Check the position of the patient’s spine.
ª
Ensure that the patient’s spine is slightly inclined, as shown in the
diagram.
Tip: To achieve the correct positioning of the spine, ask the
patient to take a small step towards the column of the unit. The
patient’s cervical vertebrae are thus stretched. This prevents
regions of diminished density in the anterior tooth region on the
X-ray.
6. Use the green arrows on the touchscreen to align the patient’s head
inclination until the desired position is reached. Instruct the patient to
let their head rest.
If the green arrow on the touchscreen points up, press the button for
height adjustment A upwards.
CAUTION! If no change in the angle of the bite block plate is found
for about 3 seconds, the height adjustment motor runs at a higher
speed.
7. When the green arrow points downwards, press the down button B.
ª
The inclination of the patient’s head changes according to the
height of the unit. While the angle of the bite block plate is being
changed, the unit height can only travel at a very slow speed.
ª
The green arrow on the head symbol indicates how far the unit
height must be moved until the nominal position for head
inclination is reached. The inclination of the displayed head
symbol also changes accordingly.
ª
Once the desired position is reached, the movement stops
automatically and a beep is sounded by the user interface. The
green-illuminated arrows of the height adjustment buttons light
up blue.
8. Switch on the light localizer. CAUTION! Risk of dazzle
ª
Two red laser lines reflect on the patient’s head. To switch off the
light localizer, press the key again. It switches off automatically
after approx. 100 seconds.