Denso WINCAPS III, Руководство пользователя

Страница: 163 / 198

Chapter 9 Vision Manager
145
9.2.3.2 Entering the Vision monitor coordinates
There are the following three ways to enter the Vision monitor coordinates.
• Direct entry: Directly entering numerical values
• Cursor input: Marking the corresponding point in the Vision monitor window with the cursor
• Measurement input: Finding the center of gravity with image analysis
The following are the procedures.
(1) Direct entry
Double-click the x- or y-coordinate cell in the Vision monitor area of the calibration data table and enter a numer-
ical value.
(2) Cursor input
Indicate the corresponding point in the Vision monitor window with the crosshair cursor.
Operating procedure
1.
Display an image in the Vision monitor window.
2.
Specify the point to edit.
3.
Select the Cursor input radio button to display the crosshair cursor in the Vision monitor
window.
4.
Move the crosshair cursor to the target coordinates with dragging or with arrow keys.
Moving crosshair cursor with keyboard
← , → , ↑ and ↓ keys: These four arrow keys move the crosshair cursor in the corresponding direction.
5.
Press the Read button to read in the cursor coordinates.
Crosshair cursor Point