Denso WINCAPS III, Руководство пользователя

Страница: 141 / 198

Chapter 8 Logging
123
8.1.2 Error trigger log
A record log is saved in flash memory when a specified error occurs. Error logs, operational logs, control logs and
trace logs (multi) are available. This is used when searching for the causes of errors.
Errors specifiable by the error trigger are of two types: those specified by error level and those of a particular error
code.
Configuring with teach pendant
Error trigger logging records a log when the specified error occurs for the first time from the configuration of
the error. It does not update the log data until the error is configured again.
Press F6 (Setting)|F2 (Log)|F5 (Error trigger) and specify the error logging mode (1 or 2).
Configuring with mini-pendant
Press Log|ErrTrig, then specify the error logging mode.
Note
Error trigger logs retain the various recorded logs when a specified error occurs. Log data retained
(not updated) through STOPLOG or another command in log operation is saved in flash memory.
If the log is non-empty, a special symbol (
{ ) appears on the first line of this dialog box.
Mode = 0 : This setting disables all error triggers.
Mode = 1 : An occurrence of an error of the specified error level or higher triggers logging.
Mode = 2 : An occurrence of an error of the specified error code triggers logging.