27
ENGLISH
10
SURROUND
Before playing with the surround function
• Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 13) or from the remote
control unit, as described below.
• Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only
effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically
stored in the memory.
1
2
3
4
5
6
7
8
9
+10
0
TV/
VCR
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
VDP
VCR-1
RDS
PTY
RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO
CD
OUTPUT
TEST
TONE
SPEAKER
RETURN
SETUP
SHIFT
A/B
MUTING
BAND
MODE
TUNING
TUNING
2
1, 3
1
Press the TEST TONE button.
TEST
TONE
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as described below.
FL
C
FR
SR
SBR
SBL
SL
SW
FADER
1
Select the speaker whose level you want to
adjust.
CH VOL
(Main unit)
2
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND
MODE
TUNING
TUNING
2
1
B
1
2
The channel whose channel level is adjusted
lowest can be faded to –12 dB using the fader
function.
If the channel levels are adjusted separately after
adjusting the fader, the fader adjustment values
are cleared, so adjust the fader again.
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels
(SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different
positions when playing multi-channel music sources.
1
Select “FADER”.
This is only displayed when setting the fader control.
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
TUNER
PHONO
CD
RETURN
SETUP
SHIFT
A/B
MUTING
BAND
MODE
TUNING
TUNING
2
1
B
1
2
(Remote control unit)
2
Test tones are output from
the different speakers. Use
the channel volume adjust
buttons to adjust so that the
volume of the test tones is
the same for all the speakers.
BAND
MODE
TUNING
TUNING
(Remote control unit)
3
After completing the
adjustment, press the TEST
TONE button again.
TEST
TONE
(Remote control unit)
ENTER
SHIFT
(Remote control unit)
The channel switches as shown below each
time the button is pressed.
Adjust the level of the selected speaker.
SELECT
(Main unit)
BAND
MODE
TUNING
TUNING
(Remote control unit)
When the surround back speaker setting is set
to “1spkr” for “Speaker Configuration”, this is
set to “SB”.
NOTES:
• The adjustment range for the different channels
is +12 dB to –12 dB.
• When using the DIRECT mode, the sound from
the subwoofer can be cut by lowering the SW
(subwoofer) setting one step from –12 dB
(setting it to “OFF”).
FL
C
FR
SR
SBR
SBL
SL
SW
FADER
CH VOL
(Main unit)
ENTER
SHIFT
(Remote control unit)
The channel switches in the order shown
below each time this button is pressed.
2
Press the
D
button to reduce the volume of the
front channels, the
H
button to reduce the
volume of the rear channels.
SELECT
(Main unit)
BAND
MODE
TUNING
TUNING
(Remote control unit)
The fader function does not affect the SW
channel.
Dolby Surround Pro Logic
II
mode
1
Select the Dolby Surround Pro Logic
II
mode.
• The Dolby Pro Logic indicator lights.
SURROUND
MODE
DOLBY/DTS
SURROUND
Light
(Main unit)
(Remote control unit)
2
Play a program source with the
mark.
• For operating instructions, refer to the manuals of the
respective components.
B
1
3, 5 1, 4, 6
SELECT
1
2
3
4
5
6
7
8
9
+10
0
TV/
VCR
TV
CD
CDR/MD/ TAPE RECEIVER
VCR
DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP
DVD
TUNER
VDP
VCR-1
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO
CD
SURROUND
PTY
RT
RDS
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.IN
MODE
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND
MODE
TUNING
TUNING
1
4, 5, 6
3
Display