Delta InfraSuite RDA037, Руководство пользователя

Страница: 41 / 92

41
(Figure 3-21: Outdoor Power Cable)
3.3.2 Connecting the Signal Cables
Step 1
At the rear of the indoor unit’s cabinet top, lift the signal cover; or at the bottom rear, use
needle-nose pliers to remove the knocking-piece. Remove the cable gland from the
accessory pack and remove its nut. Rotate and tighten the cable gland on the knocking-
piece, and pass the signal cable through the signal cable hole at the top or bottom of the
cabinet.
Step 2
Pass the signal cable through the cover or the cable gland, and connect the cable to the
indoor unit’s X1/X2 ports. (Remove the head of the terminal to be connected. Once the wire
is connected to the head, plug both together to the terminal.)
Step 3
For the routing cable, use the cable tie to fasten it onto the cabinet’s supporting column.
Step 4
Use a lower access approach to fasten the cable gland.
WIRE MOUNT