Delta InfraSuite RDA037, Руководство пользователя

Страница: 20 / 92

InfraSuite R Series – Air Cooled Type 20
(Figure 3-4: Removing Transport Fasteners from the Compressor)
3.1.4 Positioning
After moving the unit into place and once it is parallel with the adjacent cabinet, you must
position it so as to ensure its stability. The following two methods can be used, depending
on the installation environment:
 Cabinet fasteners
If the adjacent cabinets are Delta cabinets (MSR1110 and MSR2110), you may use
connecting fasteners to fix the equipment. Each cooling unit is provided with four
connecting fasteners (two at the front and two at the rear). You must remove the front
and back doors before installing the connecting fastener. Refer to the following
procedures:
Step 1
If the front door is locked, use the attached key to open it.
Step 2
Remove the unit’s earth wire and the control panel’s flat cable, raise the front door, and
take it out.