Delta AH02HC-5A, Руководство по оборудованию

Страница: 76 / 229

AH500 Hardware Manual

AH10DNET-5A
IN 1
IN 0
D R 1
D R 0
1 0D N ET
N od e A d d re s s
x10
x10
N S
M S
1
12
2
3
4
7
6
8
9
11
10
5
Number Name Description
1 Model name Model name of the module
2
Seven-segment
display
Display
3 Address knob Setting the address
4 Function switch Setting the functions
5
DeviceNet
connector DeviceNet is used to interconnect control devices for data
exchange.
6 MS LED indicator Indicating the status of the module
7 NS LED indicator Indicating the status of the network
8
Removable terminal
block
Terminals for wiring
9 Label Nameplate
10 Set screw Fixing the module
11 Connector Connecting the module and a backplane.
12 Projection Fixing the module

The address knobs
It is used to set the node address of AH10DNET-5ª on a DeviceNet network. (Node addresses
range from 0 to 63.)
Setting Description
0…63
Available nodes on a
DeviceNet network
Unavailable nodes on a
DeviceNet network
64…99
Example: If users want to set the communication address of AH10DNET-5A to 26, they can turn
the knob corresponding to x10
1
to 2, and turn the knob corresponding to x10
0
to 6.
Note:
1. When the power supply is cut off, the node address is set. After the setting of the node
address is complete, AH10DNET-5A can be supplied with power.
2. If AH10DNET-5A is running, changing the node address is unavailable.
3. Please use a slotted screwdriver to turn the knobs with care, and do not scrape them.
3-45