Delta AH02HC-5A, Руководство по оборудованию

Страница: 152 / 229

AH500 Hardware Manual
5.9.1.3 Installing the DeviceNet Connector
 After the wiring is complete, users can insert the DeviceNet connector into the interface.
 Tighten the two screws on the DeviceNet connector.
Note:
 After the communication cable is kept separate from the power cable, the electromagnetic
interference is reduced.
 Only after the both ends of the shielded cable are grounded can the shielded cable be brought
into full play.
5.10 Wiring Motion Control Modules
5.10.1 Specifications for Motion Control Modules

AH02HC-5A
Item Specifications
Number of channels
2 channels
Input
(differential
input)
CH0: X0.8+, X0.8-, X0.9+, and X0.9-
CH1: X0.10+, X0.10-, X0.11+, and X0.11-
Pulse format
Pulse/Direction (one phase and one input)
Counting up/Counting down (one phase and two inputs)
One time the frequency of A/B-phase inputs (two phases and
two inputs)
Four times the frequency of A/B-phase inputs (two phases and
two inputs)
Input signal
Signal level
5~24 V DC
Maximum
frequency of
counting
The maximum frequency is 200 kHz.
Range
The number of sampled pulses is within the range between
-200000 and 200000.
The number of accumulated pulses is within the range between
-99999999 and 99999999.
The number of input pulses is within the range between
-2147483648 and 2147483648.
Specifications
Type
General count
Circular count
5-39