Delta AH02HC-5A, Руководство по оборудованию

Страница: 151 / 229

Chapter 5
OOWiring
5-38
5.9 Wiring the RTU Module
5.9.1 Wiring AHRTU-DNET-5A
5.9.1.1 DeviceNet Connector
Pin Signal Color Description
5 V+ Red 24 V DC
4 CAN_H White
3 Ground -
It is connected to a
shielded cable.
2 CAN_L Blue Signal-
1 V- Black 0 V DC
1
2
3
4
5
5.9.1.2 Joining the Cable to the DeviceNet Connector

Remove the 30 millimeter plastic jacket of the cable
with a professional tool. Please do not damage the
shielded cable when the plastic jacket is removed.
Approximately 30 mm
 After users remove the metallic shield and the foil,
they can see two power cables (in red and black
respectively), two signal cables (in blue and white
respectively), and one shielded cable.
Shielded cable
 After the metallic shield and the foil are removed,
users need to remove the plastic jackets of the
power cables and the plastic jackets of the signal
cables properly.
 Insert the communication cable into the holes in the
connector.
Blue (CAN_L)
Shielded cable (CAN_SHLD)
Black (V-)
Red (V+)
White(CAN_H)
 After the communication cable is inserted into the
holes in the connector, tighten the screws on the
connector with a slotted screwdriver.