Dell Z9000, Руководство по настройке

Страница: 746 / 968

Authorization Mode: role or privilege
Role Inheritance Modes
netoperator
netadmin Exec Config Interface Router IP Route-map Protocol MAC
secadmin Exec Config Line
sysadmin Exec Config Interface Line Router IP Route-map
Protocol MAC.
myrole secadmin Exec Config Line
Modifying Command Permissions for Roles
You can modify (add or delete) command permissions for newly created user roles and system defined
roles using the
role mode { { { addrole | deleterole } role-name } | reset } command
command in Configuration mode.
NOTE: You cannot modify system administrator command permissions.
If you add or delete command permissions using the
role
command, those changes only apply to the
specific user role. They do not apply to other roles that have inheritance from that role. Authorization and
accounting only apply to the roles specified in that configuration.
When you modify a command for a role, you specify the role, the mode, and whether you want to restrict
access using the
deleterole
keyword or grant access using the
addrole
keyword followed by the
command you are controlling access. For information about how to create new roles, see also Creating a
New User Role.
The following output displays the modes available for the
role
command.
Dell (conf)#role ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Examples: Deny Network Administrator from Using the show users Command.
The following example denies the
netadmin
role from using the
show users
command and then
verifies that
netadmin
cannot access the
show users
command in exec mode. Note that the
netadmin
role is not listed in the
Role access: secadmin,sysadmin
, which means the
netadmin
cannot access the
show users
command.
Dell(conf)#role exec deleterole netadmin show users
Dell#show role mode exec show users
Role access: secadmin,sysadmin
Example: Allow Security Administrator to Configure Spanning Tree
The following example allows the security administrator (secadmin) to configure the spanning tree
protocol. Note
command is protocol spanning-tree.
Dell(conf)#role configure addrole secadmin protocol spanning-tree
746
Security