manualshive.com logo in svg

Dell Z9000, Руководство по настройке

Поделиться
Скачать
Dell Z9000 Скачать руководство пользователя страница 556

Router Priority and Cost

Router priority and cost is the method the system uses to “rate” the routers.

For example, if not assigned, the system selects the router with the highest priority as the DR. The second 
highest priority is the BDR.

• Priority is a numbered rating 0 to 255. The higher the number, the higher the priority.
• Cost is a numbered rating 1 to 65535. The higher the number, the greater the cost. The cost assigned 

reflects the cost should the router fail. When a router fails and the cost is assessed, a new priority 

number results.

Figure 86. Priority and Cost Examples

OSPF with Dell Networking OS

Dell Networking OS supports up to 10,000 OSPF routes for OSPFv2. Within that 10,000 routes, you can 
designate up to 8,000 routes as external and up to 2,000 as inter/intra area routes.

Dell Networking OS version 9.4(0.0) and later support only one OSPFv2 process per VRF. Dell Networking 
OS version 9.7(0.0) and later support OSPFv3 in VRF. Also, on OSPFv3, Dell Networking OS supports only 
one OSPFv3 process per VRF.
OSPFv2 and OSPFv3 can co-exist but you must configure them individually.

556

Open Shortest Path First (OSPFv2 and OSPFv3)

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды