Dell Z9000, Руководство по настройке

Страница: 39 / 968

Layer 2 protocols are disabled by default. To enable Layer 2 protocols, use the
no disable
command.
For example, in PROTOCOL SPANNING TREE mode, enter
no disable
to enable Spanning Tree.
Obtaining Help
Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using
the
?
or help command:
• To list the keywords available in the current mode, enter
?
at the prompt or after a keyword.
• Enter
?
after a prompt lists all of the available keywords. The output of this command is the same for
the help command.
Dell#?
cd Change current directory
clear Reset functions
clock Manage the system clock
configure Configuring from terminal
copy Copy from one file to another
debug Debug functions
--More--
• Enter
?
after a partial keyword lists all of the keywords that begin with the specified letters.
Dell(conf)#cl?
class-map
clock
Dell(conf)#cl
• Enter
[space]?
after a keyword lists all of the keywords that can follow the specified keyword.
Dell(conf)#clock ?
summer-time Configure summer (daylight savings) time
timezone Configure time zone
Dell(conf)#clock
Entering and Editing Commands
Notes for entering commands.
• The CLI is not case-sensitive.
• You can enter partial CLI keywords.
– Enter the minimum number of letters to uniquely identify a command. For example, you cannot
enter
cl
as a partial keyword because both the
clock
and
class-map
commands begin with the
letters “cl.” You can enter
clo
, however, as a partial keyword because only one command begins
with those three letters.
• The TAB key auto-completes keywords in commands. Enter the minimum number of letters to
uniquely identify a command.
• The UP and DOWN arrow keys display previously entered commands (refer to Command History ).
• The BACKSPACE and DELETE keys erase the previous letter.
• Key combinations are available to move quickly across the command line. The following table
describes these short-cut key combinations.
Short-Cut Key
Combination Action
CNTL-A Moves the cursor to the beginning of the command line.
Configuration Fundamentals
39