manualshive.com logo in svg

Dell Z9000, Руководство по настройке

Поделиться
Скачать
Dell Z9000 Скачать руководство пользователя страница 360

20

IPv4 Routing

IPv4 routing is supported on Dell Networking OS.

The Dell Networking Operating System (OS) supports various IP addressing features. This chapter 
describes the basics of domain name service (DNS), address resolution protocol (ARP), and routing 
principles and their implementation in the Dell Networking OS.

IP Feature

Default

DNS

Disabled

Directed Broadcast Disabled

Proxy ARP

Enabled

ICMP Unreachable Disabled

ICMP Redirect

Disabled

 

IP Addresses

Dell Networking OS supports IP version 4, as described in RFC 791. Dell Networking OS also supports 

classful routing and variable length subnet masks (VLSM).

With VLSM, you can configure one network with different masks. Supernetting, which increases the 
number of subnets, is also supported. To subnet, you add a mask to the IP address to separate the 
network and host portions of the IP address.
At its most basic level, an IP address is 32-bits composed of network and host portions and represented 
in dotted decimal format. For example, 00001010110101100101011110000011 is represented as 
10.214.87.131.

For more information about IP addressing, refer to RFC 791, Internet Protocol.

Implementation Information

In Dell Networking OS, you can configure any IP address as a static route except IP addresses already 
assigned to interfaces.

NOTE: Dell Networking OS supports 31-bit subnet masks (/31, or 255.255.255.254) as defined by 
RFC 3021. This feature allows you to save two more IP addresses on point-to-point links than 30-bit 
masks. Dell Networking OS supports RFC 3021 with ARP.

Configuration Tasks for IP Addresses

The following describes the tasks associated with IP address configuration.

Configuration tasks for IP addresses includes:

360

IPv4 Routing

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды