manualshive.com logo in svg

Dell Z9000, Руководство по настройке

Поделиться
Скачать
Dell Z9000 Скачать руководство пользователя страница 725

RADIUS

Remote authentication dial-in user service (RADIUS) is a distributed client/server protocol.

This protocol transmits authentication, authorization, and configuration information between a central 
RADIUS server and a RADIUS client (the Dell Networking system). The system sends user information to 
the RADIUS server and requests authentication of the user and password. The RADIUS server returns one 
of the following responses:

•

Access-Accept

 — the RADIUS server authenticates the user.

•

Access-Reject

 — the RADIUS server does not authenticate the user.

If an error occurs in the transmission or reception of RADIUS packets, you can view the error by enabling 
the 

debug radius

 command.

Transactions between the RADIUS server and the client are encrypted (the users’ passwords are not sent 
in plain text). RADIUS uses UDP as the transport protocol between the RADIUS server host and the client.

For more information about RADIUS, refer to RFC 2865, 

Remote Authentication Dial-in User Service

.

RADIUS Authentication

Dell Networking OS supports RADIUS for user authentication (text password) at login and can be 

specified as one of the login authentication methods in the 

aaa authentication login

 command.

Idle Time

Every session line has its own idle-time. If the idle-time value is not changed, the default value of 

30 

minutes

 is used.

RADIUS specifies idle-time allow for a user during a session before timeout. When a user logs in, the 
lower of the two idle-time values (configured or default) is used. The idle-time value is updated if both of 
the following happens:

• The administrator changes the idle-time of the line on which the user has logged in.
• The idle-time is lower than the RADIUS-returned idle-time.

ACL Configuration Information

The RADIUS server can specify an ACL. If an ACL is configured on the RADIUS server, and if that ACL is 

present, the user may be allowed access based on that ACL.

If the ACL is absent, authorization fails, and a message is logged indicating this.
RADIUS can specify an ACL for the user if both of the following are true:

• If an ACL is absent.
• If there is a very long delay for an entry, or a denied entry because of an ACL, and a message is 

logged.

NOTE: The ACL name must be a string. Only standard ACLs in authorization (both RADIUS and 
TACACS) are supported. Authorization is denied in cases using Extended ACLs.

Security

725

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды