manualshive.com logo in svg

Dell Z9000, Руководство по настройке

Поделиться
Скачать
Dell Z9000 Скачать руководство пользователя страница 580

• Specify whether some or all some of the interfaces are passive.

CONF-IPV6-ROUTER-OSPF mode

passive-interface {

interface slot/port

}

Interface

: identifies the specific interface that is passive.

– For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port 

information.

– For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

– For a port channel interface, enter the keywords 

port-channel

 then a number.

– For a VLAN interface, enter the keyword 

vlan

 then a number from 1 to 4094.

To enable both receiving and sending routing updates, use the 

no passive-interface interface 

command.
To indicate that hello packets are not transmitted on that interface, when you configure a passive 
interface, the 

show ipv6 ospf interface

 command adds the words 

passive interface

.

Redistributing Routes

You can add routes from other routing instances or protocols to the OSPFv3 process.
With the 

redistribute

 command, you can include RIP, static, or directly connected routes in the OSPF 

process. Route redistribution is also supported between OSPF Routing process IDs.

To add redistributing routes, use the following command.

• Specify which routes are redistributed into the OSPF process.

CONF-IPV6-ROUTER-OSPF mode

redistribute {bgp | connected | static} [metric 

metric-value

 | metric-type 

type-value

] [route-map 

map-name

] [tag 

tag-value

]

Configure the following required and optional parameters:
–

bgp | connected | static

: enter one of the keywords to redistribute those routes.

–

metric 

metric-value

: The range is from 0 to 4294967295.

–

metric-type 

metric-type

: enter 

1

 for OSPFv3 external route type 1 OR 

2

 for OSPFv3 external 

route type 2.

–

route-map 

map-name

: enter a name of a configured route map.

–

tag 

tag-value

: The range is from 0 to 4294967295.

Configuring a Default Route

To generate a default external route into the OSPFv3 routing domain, configure Dell Networking OS.
To specify the information for the default route, use the following command.

• Specify the information for the default route.

CONF-IPV6-ROUTER-OSPF mode

default-information originate [always [metric 

metric-value

] [metric-type 

type-value

]] [route-map 

map-name

]

Configure the following required and optional parameters:

580

Open Shortest Path First (OSPFv2 and OSPFv3)

Содержание Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды