CLI
365
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
D E L L CO N F I D E N T I A L – P R E L I M I N A RY 8 / 9 / 16 - F O R P RO O F O N L Y
ping ipv6
{
ipv6-address | hostname
} [
size packet_size
] [
count packet_count
]
[
timeout time_out
] [
source
source-address
]
Parameters
•
ip
—Use IPv4 to check the network connectivity.
•
ipv6
—Use IPv6 to check the network connectivity.
•
ipv4-address
—IPv4 address to ping.
•
ipv6-address
—Unicast or Multicast IPv6 address to ping. When the IPv6
address is a Link Local address (IPv6Z address), the outgoing interface
name must be specified. See
•
hostname
—Hostname to ping (Length: 1-160 characters. Maximum label
size for each part of the host name: 58.)
•
size
packet_size
—Number of bytes in the packet not including the VLAN
tag. The default is 64 bytes. (IPv4:64–1518, IPv6: 68–1518)
•
count
packet_count
—Number of packets to send, from 1 to 65535
packets. The default is 4 packets. If 0 is entered, it pings until stopped (0–
65535).
•
time
time-out
—Timeout in milliseconds to wait for each reply, from 50 to
65535 milliseconds. The default is 2000 milliseconds (50–65535).
•
source
source-address
—Source address (Unicast IPv4 address or global
Unicast IPv6 address).
Default Usage
N/A
Command Mode
Privileged EXEC mode
User Guidelines
Press
Esc
to stop pinging. Following are sample results of the ping command:
•
Destination does not respond
—If the host does not respond, a “no answer
from host” appears within 10 seconds.
•
Destination unreachable
—The gateway for this destination indicates that
the destination is unreachable.
