128
Logs and Alerts
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Logs&Alerts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A R Y 8 / 9 /1 6 - FO R PR O O F O N L Y
–
IPv6 Address Type
— When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local
— A Link Local address that is non-routable and used
for communication on the same network only.
•
Global
— A globally unique IPv6 address; visible and reachable
from different subnets.
–
Log Server IP Address
— Enter the IP address of the remote SYSLOG
server.
–
Server Description
— Enter a server description.
–
UDP Port
— Enter the UDP port to which the logs are sent for the
selected server.
–
Facility
— Select a user-defined application from which system logs
are sent to the remote server. Only a single facility can be assigned to a
single server. If a second facility level is assigned, the first facility level
is overridden. All applications defined for a device utilize the same
facility on a server.
–
Severity to Include
— Check the severity levels to be logged to the
remote server. The event severity levels are listed on this page in
descending order from the highest severity to the lowest. When a
severity level is selected to appear in a log, all higher severity events are
automatically selected to appear in the log. When a security level is
not selected, no lower severity events appear in the log.
