Dashboard
63
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Dashboard.fm
D E L L CO N F I D E N T I A L – P R E L I M I N A RY 8 / 9 / 16 - F O R P RO O F O N L Y
–
Admin Duplex Mode
— Select the port duplex mode (this is only
possible if Auto Negotiation is not enabled). The options are:
•
Full
— The interface supports transmission between the device
and the client in both directions simultaneously.
•
Half
— The interface supports transmission between the device
and the client in only one direction at a time.
–
Flow Control
— Set flow control on the port. The following options
are available:
•
Enable/Disable
— Enable/disable flow control on the port
(Enabled is the default).
•
Auto Negotiation
— Enables auto-negotiation of flow control on
the port.
7
Click
Next
to view a summary of the port configuration.
8
Click
Apply
to save the changes.
LAG
The following processes can be performed in this wizard.
Assign Ports to a LAG
To assign ports to a LAG:
1
Select
Assign Ports to a LAG
.
2
Click
Next
.
3
Select one or more ports to assign to a LAG.
4
Enter the following fields:
–
Port Edit Mode
— Select one of the following options:
•
Edit LAG Port Assignment
— Use to modify the ports in the
LAG.
•
Clear LAG Port Assignment
— Use to remove ports from the
LAG.
–
LAG ID
— Select a LAG ID.
–
Port VLAN Mode
— Select either
Access
,
General
or
Trunk
. See
