Dell S4048T-ON, Руководство по настройке

Страница: 800 / 1146

Configuring the Enable Password Command
To configure Dell Networking OS, use the
enable
command to enter EXEC Privilege level 15. After entering the command, Dell
Networking OS requests that you enter a password.
Privilege levels are not assigned to passwords, rather passwords are assigned to a privilege level. You can always change a password for any
privilege level. To change to a different privilege level, enter the
enable
command, then the privilege level. If you do not enter a privilege
level, the default level 15 is assumed.
To configure a password for a specific privilege level, use the following command.
• Configure a password for a privilege level.
CONFIGURATION mode
enable password [level level ] [ encryption-mode ] password
Configure the optional and required parameters:
•
level level
: Specify a level from 0 to 15. Level 15 includes all levels.
•
encryption-type
: Enter 0 for clear text, 7 for DES-encrypted text, or 8 for sha256-based encrypted text.
• password : Enter a string.
To change only the password for the
enable
command, configure only the
password
parameter.
To view the configuration for the
enable secret
command, use the
show running-config
command in EXEC Privilege mode.
In custom-configured privilege levels, the
enable
command is always available. No matter what privilege level you entered Dell Networking
OS, you can enter the
enable 15
command to access and configure all CLIs.
Configuring Custom Privilege Levels
In addition to assigning privilege levels to the user, you can configure the privilege levels of commands so that they are visible in different
privilege levels.
Within Dell Networking OS, commands have certain privilege levels. With the
privilege
command, you can change the default level or
you can reset their privilege level back to the default.
• Assign the launch keyword (for example,
configure
) for the keyword’s command mode.
• If you assign only the first keyword to the privilege level, all commands beginning with that keyword are also assigned to the privilege
level. If you enter the entire command, the software assigns the privilege level to that command only.
To assign commands and passwords to a custom privilege level, use the following commands. You must be in privilege level 15.
1 Assign a user name and password.
CONFIGURATION mode
username name [access-class access-list-name ] [privilege level ] [nopassword | password
[ encryption-type ] password Secret ]
Configure the optional and required parameters:
•
name
: Enter a text string up to 63 characters(maximum) long.
•
access-class access-list-name
: Restrict access by access-class..
•
privilege level
: The range is from 0 to 15.
•
nopassword
: No password is required for the user to log in.
•
encryption-type
: Enter 0 for plain text or 7 for encrypted text.
•
password
: Enter a string. Specify the password for the user.
800 Security