manualshive.com logo in svg

Dell S4048T-ON, Руководство по настройке

Dell S4048T-ON - Устройство для сетевой конфигурации с Configuration Manual, доступным бесплатно для загрузки на manualshive.com. Руководство поможет настроить и оптимизировать работу устройства для максимальной производительности. Благодаря удобному manual пользователи смогут быстро освоить все особенности продукта.

Поделиться
Скачать
background image

The ACL agent module saves monitoring details in its local database and also in the CAM region to monitor packets that match the 
specified criterion. The ACL agent maintains data on the source port, the destination port, and the endpoint to which the packet must be 
forwarded when a match occurs with the ACL entry.

If you configure the 

flow-based enable

 command and do not apply an ACL on the source port or the monitored port, both flow-based

 

monitoring and port mirroring do not function. Flow-based monitoring is supported only for ingress traffic and not for egress packets.

The port mirroring application maintains a database that contains all monitoring sessions (including port monitor sessions). It has 
information regarding the sessions that are enabled for flow-based monitoring and those sessions that are not enabled for flow-based

 

monitoring. It downloads monitoring configuration to the ACL agent whenever the ACL agent is registered with the port mirroring 
application or when flow-based monitoring is enabled.

The 

show monitor session 

session-id

 command has been enhanced to display the Type field in the output, which indicates 

whether a particular session is enabled for flow-monitoring.

Example Output of the 

show

 Command

Dell# show monitor session 1

SessID  Source         Destination         Dir  Mode  Source IP      Dest IP         DSCP  

TTL   Drop  Rate    Gre-Protocol FcMonitor

------  ------         -----------         ---  ----  ---------      --------        ----  

---   ----  ----    -----------  ---------

   1    Te 1/2         remote-ip           rx   Port   0.0.0.0       0.0.0.0          0     

0    No    N/A        N/A        yes

Dell#

The 

show config

 command has been modified to display monitoring configuration in a particular session.

Example Output of the 

show

 Command

(conf-mon-sess-11)#show config

    !

    monitor session 11

                          flow-based enable

      source TenGigabitEthernet 1/1 destination TenGigabitEthernet 1/1 direction both

The 

show ip | mac | ipv6 accounting

 commands have been enhanced to display whether monitoring is enabled for traffic that 

matches with the rules of the specific ACL.

Example Output of the 

show

 Command

Dell# show ip accounting access-list

!

Extended Ingress IP access list kar on TenGigabitEthernet 1/1

Total cam count 1

   seq 5 permit ip 192.168.20.0/24 173.168.20.0/24 monitor

Dell#show ipv6 accounting access-list

    !

    Ingress IPv6 access list kar on TenGigabitEthernet 1/1

    Total cam count 1

     seq 5 permit ipv6 22::/24 33::/24 monitor

Enabling Flow-Based Monitoring

Flow-based monitoring is supported on the platform.
Flow-based monitoring conserves bandwidth by monitoring only specified traffic instead of all traffic on the interface. This feature is 
particularly useful when looking for malicious traffic. It is available for Layer 2 and Layer 3 ingress and egress traffic. You can specify traffic

 

using standard or extended access-lists.

1 

Enable flow-based monitoring for a monitoring session.

138

Access Control Lists (ACLs)

Содержание S4048T-ON



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S4048T-ON

IBM 3270 Operation Manual preview
3270
Бренд: IBM Страницы: 86
D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Бренд: D-Link Страницы: 25
3xLogic V250 Quick Start Manual preview
V250
Бренд: 3xLogic Страницы: 2
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Бренд: 8e6 Technologies Страницы: 66
Opvimus UMX-ETH+ Operating Instructions Manual preview
UMX-ETH+
Бренд: Opvimus Страницы: 12
SUNRICH TECHNOLOGY C-330 User Manual preview
C-330
Бренд: SUNRICH TECHNOLOGY Страницы: 5
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Бренд: Orban Страницы: 255
Stephen STES2026 Configuration Manual Manual preview
STES2026
Бренд: Stephen Страницы: 102
ZALMAN ZM-WB2 Gold User Manual preview
ZM-WB2 Gold
Бренд: ZALMAN Страницы: 9
Xircom RealPort Ethernet 10/100 User Manual preview
RealPort Ethernet 10/100
Бренд: Xircom Страницы: 30
Tektronix CTS 850 User Manual preview
CTS 850
Бренд: Tektronix Страницы: 178
Aqua Computer Aquaduct 360 XT Operating And Assembly Manual preview
Aquaduct 360 XT
Бренд: Aqua Computer Страницы: 28
ENERMAX ELC-LTTR240-TBP User Manual preview
ELC-LTTR240-TBP
Бренд: ENERMAX Страницы: 16
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Бренд: Dust Networks Страницы: 30
Draytek Vigor 2700G Specifications preview
Vigor 2700G
Бренд: Draytek Страницы: 2
Genie IP8ESP User Manual preview
IP8ESP
Бренд: Genie Страницы: 6
IDT Tsi310TM User Manual preview
Tsi310TM
Бренд: IDT Страницы: 207
Infoblox Trinzic 100 Installation Manual preview
Trinzic 100
Бренд: Infoblox Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды