manualshive.com logo in svg

Dell S4048T-ON, Руководство по настройке

Dell S4048T-ON - Устройство для сетевой конфигурации с Configuration Manual, доступным бесплатно для загрузки на manualshive.com. Руководство поможет настроить и оптимизировать работу устройства для максимальной производительности. Благодаря удобному manual пользователи смогут быстро освоить все особенности продукта.

Поделиться
Скачать
background image

Microsoft Network Load Balancing

Network load balancing (NLB) is a clustering functionality that is implemented by Microsoft on Windows 2000 Server and Windows Server 
2003 operating systems (OSs). NLB uses a distributed methodology or pattern to equally split and balance the network traffic load across a 
set of servers that are part of the cluster or group. NLB combines the servers into a single multicast group and attempts to use the 
standard multicast IP or unicast IP addresses and MAC addresses to transmit of network traffic. At the same time, NLB also uses a single 
virtual IP address for all clients as the destination IP address, which enables servers to join the same multicast group that is transparent to 
the clients (the clients do not notice the addition of new servers to the group). The clients use a cluster IP address to connect to the 
server. To avoid overloading and effective performance of the servers for optimal processing of data packets, NLB enables flooding of 
traffic over the virtual local area network (VLAN) ports (for Unicast mode) or a subset of ports in a VLAN (for Multicast mode.)
NLB functions in two modes, Unicast mode and Multicast mode. Configure the cluster IP address and the associated cluster MAC address 
in the NLB application running on the Windows Server.

•

In Unicast mode, when the server IP address attempts to be resolved to the MAC address using the address resolution protocol (ARP), 

the switch determines whether the ARP reply, obtained from the server, is an NLB type. The switch then maps the IP address (cluster 

IP) with the MAC address (cluster MAC address).

•

In Multicast mode, the cluster IP address maps to a cluster multicast MAC address you configured using a 

static ARP

 command. 

After the NLB entry is learned, the traffic forwards to all the servers in the VLAN corresponding to the cluster virtual IP address.

NLB Unicast Mode Scenario

Consider a topology in which you configure four servers, S1 through S4, as a cluster or a farm. This set of servers connects to a Layer 3 
switch, which connects to the end-clients. The servers contain a single IP address (IP-cluster address of 172.16.2.20) and a single unicast 
MAC address (MAC-Cluster address of 00-bf-ac-10-00-01) for load-balancing. Because multiple ports on a switch cannot learn a single 
MAC address, the servers are assigned MAC addresseses of MAC-s1 to MAC-s4), respectively, on S1 through S4 in addition to the MAC 
cluster address. All the servers of the cluster belong to VLAN1.

In Unicast NLB mode, the following sequence of events occurs:

•

The switch sends an ARP request to resolve the IP address to the cluster MAC address.

•

The ARP servers send an ARP response with the MAC cluster address in the ARP header and a MAC address of MAC-s1/s2/s3/s4 (for 
servers S1 through S4) in the Ethernet header.

•

The switch associates the IP address with the MAC cluster address with the last ARP response it obtains. Assume that the last ARP 
reply is obtained from MAC-s4 (assuming that the ARP response with MAC-s4 is received as the last one). The interface associated 
with server, S4, is added to the ARP table.

•

With NLB enabled, after learning the NLB ARP entry, all the subsequent traffic floods on all ports in VLAN1.

To perform load-balancing, NLB, forwards the data frame to all the servers.

NLB Multicast Mode Scenario

Consider a topology in which you configure four servers, S1 through S4, as a cluster or a farm. This set of servers connects to a Layer 3 
switch, which connects to the end-clients. They contain a single multicast MAC address (MAC-Cluster: 03-00-5E-11-11-11).

In Multicast NLB mode, configure a 

static ARP configuration

 command to associate the cluster IP address with a multicast 

cluster MAC address.

31

552

Microsoft Network Load Balancing

Содержание S4048T-ON



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S4048T-ON

3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Бренд: 3Com Страницы: 4
FS FS-BOX-V3 Quick Start Manual preview
FS-BOX-V3
Бренд: FS Страницы: 19
ZALMAN ZM-WB2 Gold User Manual preview
ZM-WB2 Gold
Бренд: ZALMAN Страницы: 9
Matrox Millennium P650 User Manual preview
Millennium P650
Бренд: Matrox Страницы: 54
Uniden Data 2000 Manual preview
Data 2000
Бренд: Uniden Страницы: 5
C&T Solution VCO-6131E-4M2 User Manual preview
VCO-6131E-4M2
Бренд: C&T Solution Страницы: 129
ekwb EK-FC285 GTX Classified Installation And Mounting Manual preview
EK-FC285 GTX Classified
Бренд: ekwb Страницы: 2
RANA Systems RanaSystems 13-0010--001 User Manual preview
RanaSystems 13-0010--001
Бренд: RANA Systems Страницы: 328
SYNTEK STA-UI-A0035 User Manual preview
STA-UI-A0035
Бренд: SYNTEK Страницы: 41
Idis DR-1500 Series Quick Manual preview
DR-1500 Series
Бренд: Idis Страницы: 17
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Бренд: Planet Страницы: 16
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Бренд: ANTAIRA Страницы: 19
Alarm NX-208E Installation Manual preview
NX-208E
Бренд: Alarm Страницы: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Бренд: Genexis Страницы: 9
Primera Disc Publisher XR Installation Instructions preview
Disc Publisher XR
Бренд: Primera Страницы: 2
H3C MSR 930 Installation, Quick Start preview
MSR 930
Бренд: H3C Страницы: 4
Thermaltake Extreme Spirit Il Instruction preview
Extreme Spirit Il
Бренд: Thermaltake Страницы: 2
Ubiquiti UniFi AP PRO Quick Start Manual preview
UniFi AP PRO
Бренд: Ubiquiti Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды