Dell Precision WorkStation 210, Руководство пользователя

Страница: 45 / 247

Using the Software Support Utilities 2-5
To delete the asset tag number without assigning a new one, type
asset /d
and
press <Enter>.
$VVLJQLQJDQG'HOHWLQJDQ2ZQHU7DJ
An owner tag can be up to 80 characters; any combination of letters, numbers and
spaces is valid. To assign an owner tag, type
asset /o
and a space followed by the
new owner tag; then press <Enter>. For example, type the following command line
and press <Enter>:
asset /o ABC Company
When prompted to verify the owner tag, type
y
and press <Enter>. The system then
displays the new owner tag.
To delete the owner tag without assigning a new one, type
asset /o /d
and press
<Enter>.
Table 2-1 lists the command line options you can use with the Asset Tag utility. To use
one of these options, type
asset
and a space followed by the option .
.
'HOO$XWR6KXWGRZQ6HUYLFH
The Dell AutoShutdown service provides the Microsoft Windows 95, Windows 98,
and Windows NT 4.0 operating systems the ability to perform an orderly system
shutdown when the power button is pressed.
+RZWKH$XWR6KXWGRZQ6HUYLFH:RUNV
The power switch operates in two modes: immediate and AutoShutdown. When the
system is off, the power switch always acts in immediate mode—that is, when the
switch is pressed, the system turns on immediately.
When the system is on and the AutoShutdown service is installed, the power switch
operates in AutoShutdown mode. Pressing the power switch signals the operating
system to perform an orderly shutdown (reducing the possibility of data loss and file
corruption) before removing power from the system. During the shutdown sequence,
the power indicator on the computer blinks.
7DEOH$VVHW7DJ&RPPDQG/LQH2SWLRQV
$VVHW7DJ
2SWLRQ 'HVFULSWLRQ
/d Deletes the asset tag
number
/o <
tag
> Specifies a new owner tag
/o /d Deletes the owner tag
/? Displays the Asset Tag
utility help screen