Dell Precision WorkStation 210, Руководство пользователя

Страница: 133 / 247

Installing System Board Options 8-13
The operating life of the battery can extend up to 10 years. The battery may need
replacing if an incorrect time or date is displayed during the boot routine along with a
message such as:
Time-of-day not set — please run SETUP program
or
Invalid configuration information —
please run SETUP program
or
Strike the F1 key to continue,
F2 to run the setup utility
To determine whether the battery needs replacing, reenter the time and date through
the System Setup program and exit the program properly to save the information.
Turn off and unplug your system for a few hours, and then plug in and turn on your
system. Enter the System Setup program. If the date and time are not correct in the
System Setup program, replace your battery.
You can operate your system without a battery; however, without a battery, the
system configuration information maintained by the battery is erased if the system
is unplugged or AC power is lost. In this case, you must enter the System Setup
program and reset the configuration options .
Use the following procedure to replace the system battery with another CR2032
coin-cell battery:
1. If you have not already done so, make a copy of your system configuration
information in the System Setup program.
If the settings are lost while you are replacing the battery, you can refer to your
written or printed copy of the system configuration information to restore the
correct settings. See Chapter 3, “Using the System Setup Program,” for
instructions.
2. Remove the computer cover according to the instructions in “Removing the
Computer Cover” in Chapter 7.
&$87,216HH´3URWHFWLQJ$JDLQVW(OHFWURVWDWLF'LVFKDUJHµLQWKHVDIHW\
LQVWUXFWLRQVDWWKHIURQWRIWKLVJXLGH
:$51,1*
7KHUHLVDGDQJHURIDQHZEDWWHU\H[SORGLQJLILWLVLQFRUUHFWO\LQVWDOOHG
5HSODFHWKHEDWWHU\RQO\ZLWKWKHVDPHRUHTXLYDOHQWW\SHUHFRPPHQGHG
E\WKHPDQXIDFWXUHU'LVFDUGXVHGEDWWHULHVDFFRUGLQJWRWKHPDQXIDF
WXUHU·VLQVWUXFWLRQV